Pressure pot for cyanoacrylates, UV's, anaerobics and other low to medium viscosity fluids. No pouring needed; you just drop the bottle right into the tank, seal with wing nuts, and pressurise. Includes an air port to pressurize the tank, and a pop-off valve set at around 75 psi for safety. Accepts adhesive bottles 250gm and 500gm or containers placed inside the chamber. Comes with 1/4" OD tubing kit as well as a 1/8" connector with dip tube for use with standard fluid lines.  Easy connect to any adjustable air regulator with 6mm quick fitting.  Thread on lid works with standard fluid lines but also allows for 3/8" OD fitting and 3/8" OD tubing to be used or 1/4" OD fitting with 1/4" OD tubing.

Part ID:	TS1205
Outer Size:	3.488" W x 9.5" H (88.6mm W x 241.3mm H)
Inner Chamber:	3.150" W x 7.25" H (80.01mm W x 184.15mm H)
Weight:	1.4kg
Viscosity Range:	Liquids up to 25,000 CPS
Max Fluid Pressure:	60 psi ( 4 Bar)
Air Inlet:	6mm push fit
Material Outlet:	1/4" NPT or male luer to fluid line
Materials:	Aluminium body and 6-6 Nylon (top and base)
Lead Time:	* Ships in 5 - 7 Business Days

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.